I have just taught you how to remove the brake shoes. After that, of course, we have to install a new one. How do we install it? The following is the installation method of the brake shoe.

    1) install the inner gasket and the inner gasket cover to the inner brake shoe, and install the outer shim on the outer brake shoe.

    2) install the brake shoe holder and brake shoe on the torsion arm.

    3) hold the piston when installing the brake shoe, then install the cylinder on the torsion arm.

    4) install the sliding pin and tighten it below.

    5) use the wheel nut to fix the brake disc and step on the brake pedal until there is a reaction.

    6) check the rotating resistance of the front disc brake.

    7) install the wheel.

    After that, you can change small parts yourself.